Washing Centrifuge
Now you can manufacture parts JIT (JUST-IN-TIME) from a coil to a clean product with the in-line cleaning process patented by Dr. Goessling. De-oiling, cleaning and drying is accomplished by one piece of equipment and ideally right after the manufacturing machine.
All cleaning processes in the Washing Centrifuge run fully automatic, and the oily parts can be charged in batches. Likewise, the clean parts can be discharged in batches as well. As a result, we are the only Company on the market with a machine that you can use to successfully run a “coil to box” strategy with.
Functionality
In process station #1 of the Washing Centrifuge, adhesive oils are effectively centrifuged and homogeneously recycled.
Next in process station #2, the bulk material undergoes intensive spray cleaning with highly effective hot washing suds.
Finally in process station #3, the cleaned parts are rinsed with fresh, hot water and dried with hot air.
Afterwards, the drum is emptied.
Product Details
- Flexibility in operation
- Cost advantages and use
- Drastic reduction of oil usage, homogeneous oil recovery
- Extremely high standing times of the washing fluids
- Reproducible cleaning result, lowest possible material damage
- Tests with client parts
technical Data
| WZ350 | |
| Max. batch weight | approx. 17 lbs. (depends on shape and density of the parts) |
| Max. part length | approx. 4.7” |
| Max. part weight | approx. 2.8 ounces |
| Centrifuging time | min. 60 seconds - max. 300 seconds |
| Total cycle time | min. 80 seconds - max. 320 seconds |
| Max. throughput | approx. 770 lbs. / hour |
| Max. drum rotation speed | approx. 1100 rpm |
| WZ550 |
|
| Max. batch weight | ca. 30 kg (abhängig von Teilegeometrie und Dichte) |
| Max. part length | ca. 160 mm |
| Max. part weight | ca. 250 g |
| Centrifuging time | min. 60 s bis max. 300 s |
| Total cycle time | min. 80 s bis max. 320 s |
| Max. throughput | ca. 1.000 kg / h |
| Max. drum rotation speed | ca. 900 1/min |
| Total connection demand |
|
| Washing Centrifuge | approx. 14 Amps (please confirm) |
| Tank system | approx. 57 Amps (please confirm) |
Fields of Application
Washing centrifuges are used in a wide range of industries – wherever metal and bulk parts need to be reliably cleaned, de-oiled, and dried after processing. Their flexible design allows optimal adaptation to different materials and process requirements.
screws, screw nuts, studs, mass-production small parts
slices
small gears
Advantages
Through the combined use of centrifugal force, spray and rinsing stages, as well as hot-air drying, they offer numerous advantages for a wide range of applications – from the thorough cleaning of solid metal parts to the gentle treatment of sensitive workpieces.
Below you will find the key strengths at a glance.
Flexibility in Operation
Cold headed mass parts such as bolts, screws, rivets or round blanks are cleaned automatically by our Washing Centrifuge, as are stamped parts.
Cleaning parts after heat treatment is another application for our machine.
The base components of the cleaning units are three centrifuges that are mounted on a ring mount. Each centrifuge runs through all three cleaning stages,
so there is no transfer of parts in between the centrifuge drums.
- centrifuging of the adhesive oils and homogeneous recycling
- spray cleaning of the centrifuged parts with hot suds
- spraying with hot water to wash off excess washing suds
- drying with hot air
Your Material. Our Test Center.
Before a solution reaches you, it is thoroughly tested in our in-house technical center. Here, we test your materials under real-world conditions and develop optimal, practical concepts tailored to your needs.