JOEST delivers special vibration table for German stainless-steel producer

Categories: Published 10/24/2019

Special design for compacting powder metal

For this assignment, JOEST designed a compaction table measuring 1800 x 1800, with a deck load of 12 t and an adjustable oscillation frequency of up to 33 Hz. The table consists of a solid, 200mm thick steel plate with T-notches.

The compaction table compacts the powder metal to enable the production of high density hard-metal-briquetting-rings. These are produced using the HIP process (Hot-Isostatic Press). The powder metal and additional moulded parts are placed in a mould to be compacted. The mould is deformable, yet air-tight and ring shaped and is made of a thin metal sheet. Afterwards, the mould is set in an air-tight oven, pressurized with up to 200 Mpa (2000bar) by a cover gas. With temperatures up to 2000°C, this is where the sintering process takes place.

The large gearwheel-diameter of the standard JR 1000 had an inadmissible circumferential-speed at 2000 1/min. Therefore, JOEST implemented a modified JR 1000 without gearwheels, but with oil slingers. The deadweight of the machine is 8.8 t. The vertical direction of oscillation is achieved by the alternatingly restricted placement of the flyweights. This direction is overlain by a horizontal, circular oscillation (in the same way as a Spiral Elevator).

The very hard briquetting-rings that are manufactured using this process feature an extremely high density and possess isotropic characteristics, which means that their physical properties are the same in every space axis.

As a qualified partner in customized machinery manufacturing, JOEST is prepared for every challenge and eagerly awaits your cases of application.



All News

Press Contact

Corporate Communications
Rebecca Riedel
Mandy Radojkovic

Telefon: +49 2590 / 98 136
E-Mail: corporate-communications@joest.com

https://www.joest.com
0
0
0